The COSHH Regulations originally came into force in 1994 and were updated in 2002. COSHH provides a legal framework to protect people against health risks from the use of, or exposure to, hazardous substances used in the workplace. The COSHH regulations apply to all substances hazardous to health except asbestos and lead which have their own specific regulations. Substances which are hazardous only because they are radioactive, at high pressure, at extreme temperatures or have explosive or flammable properties are also not covered by COSHH as other regulations apply. Local Authority establishments should refer to SSERC guidance. Members in independent schools should ascertain if their school is a member of SSERC.
COSHH regulations apply to every single area of the school and any persons who may come into contact with potentially hazardous substances. For example, the substances used for cleaning, in kitchens, swimming pool water treatment or those produced during first aid, for example from nosebleeds etc.
In schools the departments most likely to be affected by the COSHH regulations are:
Science: the Regulations apply to the use, exposure and storage of chemicals and biological materials, ventilation of fume cupboards, safe disposal of waste products, etc.
Art: the ventilation of kilns, control of glazes, paints, solvents, cellulose etc
Technical: control of varnishes, paints and chemicals, control of dust from machinery, etc.
What does the Control of Substances Hazardous to Health Regulations 2002 do?
The Control of Substances Hazardous to Health Regulations 2002 (as amended) requires employers to prevent or reduce risks to health and safety from exposure to hazardous substances (including biological agents) at work.
What is a ‘substance hazardous to health’?
COSHH covers substances that are hazardous to health. Substances take many forms and may include:
- chemicals
- products containing chemicals
- fumes
- dusts
- vapours
- mists
- nanotechnology
- gases and asphyxiating gases and
- biological agents (germs). If the packaging has any of the hazard symbols then it is classed as a hazardous substance.
- germs that cause diseases such as leptospirosis or legionnaires disease and germs used in laboratories.
COSHH does not cover
- lead,
- asbestos or
- radioactive substances
because these have their own specific regulations.
The COSHH regulations outline a procedure, which enables:
- any possible hazards to be identified
- the associated risks to be considered
- a decision to be made regarding what further action is to be taken, if the risks are significant.
COSHH OBJECTIVES
The COSHH objectives are to:
- Maintain/improve standards of health when working with Substances Hazardous to Health
- Simplify existing law
- Provide one set of Regulations covering Substances Hazardous to Health
- Set clear objectives – matching precaution to risk
- Provide framework for implementing existing EU Directives
- Repeal/revoke legislation no longer relevant.
COSHH has 8 steps to be followed to comply with the regulations:
- assess the risk
- decide what precautions are needed
- prevent or adequately control exposure
- ensure that control measures are used and maintained properly, and safety procedures are followed
- monitor the exposure of employees to hazardous substances if necessary
- Carry out appropriate health surveillance if necessary
- Prepare plans and procedures to deal with accidents, incidents, and emergencies involving hazardous substances where necessary
- Ensure employees are properly informed, trained and supervised e.g. how to use personal protective equipment (PPE).
RESPONSIBILITIES OF EMPLOYERS:
Your employer is responsible for taking effective measures to control exposure and protect health.
The employer must:
- assess the risks of working with all hazardous substances
- assess steps needed to meet the requirements of the regulations
- prevent or adequately control exposure
- ensure controls are properly maintained
- monitor exposure of employees and non-employees
- perform health surveillance of employees
- examine and test control measures
- ensure that all control measures are used properly and applied e.g. use of fume cupboards
- inform/instruct/train employees and non-employees with suitable and sufficient information.
- This should include the name of the substance used and the risk. The precautions which need to be taken to protect themselves and emergency procedures to take in the event of an accident.
Does my employer have to provide me with a copy of the COSHH risk assessment?
Employers must provide information about the hazards, risks and control measures, and instruction and training to use the control measures. All employers must carry out a risk assessment and those employing five or more employees must also record significant findings. This record needs to be accessible so that safety representatives, inspectors, etc. can examine it.
RESPONSIBILITIES OF EMPLOYEES:
- Any persons, including pupils, using the school facilities have a duty to comply with any control measure, use personal protection equipment (PPE) when directed or any other item provided by the employer under the requirements of the regulations.
- If the school has fume cupboards, safety guards, protective shields, local exhaust ventilation facilities etc., they should be used when required. Make full use of protective items such as safety goggles, lab coats, latex free gloves used e.g. for the cleaning up of blood after a nosebleed and the correct method of disposal of the clinical waste produced.
- Report any defects in equipment, PPE or control measures
- Take part in appropriate safety training
- Read the department’s health and safety policy at least annually
- Store equipment and tools properly
- Carry out work according to the COSHH risk assessment e.g. ensuring pupils wear safety goggles.
SSERC produces a full list of hazardous chemicals and procedures for safe use and this should be available for reference.
RISK ASSESSMENT
The use of chemicals is controlled by risk assessments.
You can use a risk assessment template to help you keep a simple record of:
- who might be harmed and how
- what you’re already doing to control the risks
- what further action you need to take to control the risks
- who needs to carry out the action
- when the action is needed by
Source : https://www.hse.gov.uk/simple-health-safety/risk/risk-assessment-template-and-examples.htm#article
Schools should make sure they have up to date Hazard Safety Sheets for each substance.
When a school orders chemicals, the supplier is obliged to issue a “Material Safety Data Sheet”.
SSERC Home page – SSERC supply information about the storage, use, and safe disposal of chemicals and other hazardous substances. Some Local Authorities issue their own guidance which should be adhered to.
Hazard symbols (pictograms)
Hazard symbols alert us to the presence of a hazardous chemical. The symbols help us to know that the chemicals we are using might cause harm to people or the environment. The GB CLP hazard pictograms appear in the shape of a diamond with a distinctive red border and white background. One or more pictograms might appear on the labelling of a single chemical.
International safety symbols for chemicals were adopted in 2009 replacing European symbols.
What is a risk assessment?
It is important to recognize hazards and their potential to cause harm.
A risk is made up of two parts.
- the potential to cause harm and
- the likelihood of that to occur
The risk is the product of the potential and the likelihood.
Risks cannot be eliminated, only controlled, and reduced. You are duty bound to reduce them to: As Low as Reasonably Practicable (ALARP)
You must not proceed with an activity if the risk cannot be reduced to an acceptable level. A risk assessment evaluates the risks and decides whether precautions are adequate or more needs to be done to reduce the risk to acceptable levels. Keep a copy of the assessment in writing.
Two points to be considered:
- The Hazard and the degree to which it can be a danger.
- The Potential and the extent to which it might cause harm, if not controlled.
The overall risk rating considers both the Hazard factor and the Potential to cause harm.
To understand this, consider the following scenario:
If concentrated sulphuric acid is locked away in a secure chemical store:
Its Hazard factor is (on a scale of 1 – 5) = 5 (1 is low and 5 is high)
Its Potential to cause Harm (on a scale of 1 – 5) = 1 (1 is low and 5 is high)
Giving an Overall risk rating of 5 x 1 = 5 (low risk) where 1 is very low and 25 is extremely high.
Now consider if the same concentrated sulphuric acid is left in an unmarked bottle on the desk of an unlocked Science Lab.
The Hazard factor is still 5.
But because of the above conditions, its Potential to cause Harm has risen from 1 to 5. The Overall risk rating is now 5 x 5 = 25 (Extremely high risk)
When considering a hazard and its potential to cause harm – consider all factors.
Consideration must also be given to the frequency of use of all potentially hazardous substances.
Increased frequency of use will increase the overall risk.
Useful websites
What the law says on assessing risks
The law states that a risk assessment must be ‘suitable and sufficient’, ie it should show that:
- a proper check was made
- you asked who might be affected
- you dealt with all the obvious significant risks, taking into account the number of people who could be involved
- the precautions are reasonable, and the remaining risk is low
- you involved your workers or their representatives in the process
The level of detail in a risk assessment should be proportionate to the risk and appropriate to the nature of the work. Insignificant risks can usually be ignored, as can risks arising from routine activities associated with life in general, unless the work activity compounds or significantly alters those risks.
Your risk assessment should only include what you could reasonably be expected to know – you are not expected to anticipate unforeseeable risks.
Source : https://www.hse.gov.uk/managing/delivering/do/profiling/the-law.htm
What training / qualifications should I have to carry out COSHH assessments?
You don’t need any particular qualifications but you must be competent. This means you must have the necessary knowledge, skills and experience to do the job properly. You should:
- understand hazard and risk
- know how the work can expose people to substances hazardous to health
- have the ability (and authority) to collect all the necessary information
- have the knowledge, skills and experience to make the right decisions about how to control exposure.
Source : https://www.hse.gov.uk/coshh/faq.htm#training
Do we need to record COSHH assessments on a specific form?
No. Risk assessments may vary in their complexity, so you are free to use something that works for you.
However, make sure you cover the key points:
- what are the dangers, and to whom, doing what task
- what control measures could prevent harm
- using these control measures and checking that they work
Source : https://www.hse.gov.uk/coshh/faq.htm#keeping-records
Management of Health and Safety at Work Regulations 1999
Under the Management of Health and Safety at Work Regulations 1999, the minimum your employer must do is:
- identify what could cause injury or illness in your business (hazards)
- decide how likely it is that someone could be harmed and how seriously (the risk)
- take action to eliminate the hazard, or if this isn’t possible, control the risk
WORKPLACE EXPOSURE LIMITS (WELS)
New or revised workplace exposure limits for 13 substances, some of which occur in schools, have been introduced from 17 January 2020.
This latest version of EH40/2005 ‘Workplace exposure limits’ has been updated to include the new and revised workplace exposure limits (WELs) as introduced by the Carcinogens and Mutagens Directive (EU) 2017/2398 amending Directive (2004/37/EC).
It will guide those responsible for controlling exposure to hazardous substances at work.
EH40/2005 Workplace exposure limits
ADDITIONAL INFORMATION
You can find further information on working with hazardous substances in the HSE publication Working with Substances Hazardous to Health.(hyperlink)
COSHH does not cover
- lead
- asbestos
- radioactive substances
because these have their own specific regulations.
Lead
HSE (LEAD) – https://www.hse.gov.uk/lead/index.htm
SSERC (LEAD METALS AND COMPOUNDS) – https://www.sserc.org.uk/health-safety/chemistry-health-safety/hazchem_database-2/lead/
Asbestos
Asbestos was used in many thousands of building materials which were used extensively in Great Britain between the mid 1840’s through to the end of 1999. Asbestos containing materials
Asbestos Containing Materials (ACMs) can include, but are not limited to:-
- some ceiling tiles, floor tiles, partitions or as an insulation material for pipes or boilers
- Asbestos Insulating Board (AIB) used for fire protection, insulation, partitioning, door linings fume cupboard linings and ducts
- sprayed asbestos was used for thermal insulation, fire protection and sound proofing in voids and wall partitions.
Asbestos was also used extensively in science labs in heat proof mats, heat resistant gloves and mittens (woven textiles), worktop counters (composites).
The main types of asbestos commonly used were “white asbestos” (chrysotile), “blue asbestos” (crocidolite) and “brown asbestos” (amosite).
Since 1999, it has been illegal to use asbestos in the United Kingdom and most of Europe, however if your school or associated buildings were built or refurbished up to the year 2000 you must assume that asbestos is present unless it is proven otherwise. (Regulation 5, Control of Asbestos Regulations 2012).
Asbestos materials which are maintained in a good condition and are unlikely to be damaged or disturbed are not considered to be a significant risk to health as long as it is managed properly.
Teachers and pupils should not do activities which damage ACMs such as pinning or tacking work to insulation boards or ceiling tiles. Ceiling tiles must not be lifted. They should also report damage to fixtures and fittings which may release asbestos fibres for example to ceiling tiles or floor tiles.
The most likely way for damage or disturbance to occur is during maintenance, repair or construction. The HSE recommends that ACMs are left in place and managed where they are in good condition or will not be damaged, disturbed or worked on. Where ACMs do pose a risk to health by being in poor condition, or where they may become damaged or disturbed then advice should be sought by your employer who should consult a recognised asbestos consultant to decide the most appropriate action needed.
Asbestos which is damaged releases fibres which can be inhaled into the lungs. Exposure to asbestos may lead to four main diseases including mesothelioma, a cancer of the lining of the lungs which often proves fatal. The time from exposure (latency) to developing symptoms of the disease may be 15-60 years.
If you are concerned that you have been exposed to asbestos fibres, you are advised to visit the doctor and ask for a note to be made in your personal record about the possible exposure including the date, duration, type of asbestos and likely exposure levels.
It is unlikely that a one off, short term, exposure to asbestos would be considered harmful to health. However, great care should be observed, and a full report made following any form of exposure to asbestos.
Damaged materials must be reported to ensure they and the area are made safe. Asbestos comes under The Control of Asbestos Regulations 2012. Regulation 4 of the Control of Asbestos Regulations 2012 places a specific duty on employers who control buildings to manage asbestos. In education, the duty holder is the employer and can vary with the type of establishment.
The employer’s duties to control asbestos
- Check for asbestos and identify if it is present, where and in what condition
- Presume materials have asbestos in them unless information to the contrary is available
- Keep a register or record of its location in each school
- Provide this information to anyone who is likely to work near it or disturb it e.g. teachers, contactors or emergency services
- Carry out a risk assessment on materials containing asbestos
- Have a written plan for managing asbestos which is reviewed and revised regularly
- Make sure any asbestos containing materials are properly maintained
- Provide adequate information, instruction and training to all staff
- Put in place measures to prevent and control exposure to asbestos of all staff, pupils and others
- Make sure that any work with asbestos is carried out by a fully trained, insured and preferably HSE licensed contractor and that waste is disposed of correctly
Employees’ Duties
- To know there is an asbestos register showing where asbestos is in the school
- To know there is an asbestos management plan
- Not to carry out any action which could disturb ACMs e.g. pinning work to walls
- To report defects to fixtures and fittings which could release fibres e.g. ceiling tiles
- To know what to do if exposed to asbestos fibres or in an emergency
Further reading
The Control of Asbestos Regulations 2012 – https://www.hse.gov.uk/asbestos/regulations.htm
Asbestos in Clasp and other system buildings – https://www.hse.gov.uk/services/education/asbestos.htm
Guidance for duty holders by the HSE Asbestos in Schools – https://www.hse.gov.uk/asbestos/duty.htm
CLASP working group March 2007 – https://www.hse.gov.uk/services/education/clasp.htm
Assessment of Asbestos Management in schools undertaken by the Asbestos Testing and Consultants Association (ATaC) 24th March 2010
A short guide to managing asbestos in premises HSG227 – HSE – https://www.hse.gov.uk/pubns/books/hsg227.htm
Asbestos in schools (www.hse.gov.uk/services/education/asbestos.htm)
(https://www.hse.gov.uk/asbestos/index.htm )
RADIATION
HSE (RADIATION) https://www.hse.gov.uk/radiation/index.htm
SSERC (RADIATION) https://www.sserc.org.uk/health-safety/physics-health-safety/ionising-radiation/
ROOM DIMENSIONS
| Space type | Recommended size |
| General classroom | 55 m2 for 30 |
| General science laboratory | 83 m2for 30 |
| Specialist science laboratory (up to A-level) | 90 m2 for 30 |
| General art room | KS3/4 83m2 for 30 |
| 3D art room | 97m2 for 30 |
| 3D art room (textiles) | 104m2 for 32 |
| Constructional textiles room | 83m2 for 25 |
| Graphic products | 83m2 for 25 |
| Electronics and control systems | 83m2 for 25 |
| Resistant materials (RM) | 104m2 for 24 if one space, 97m2 if two spaces |
| RM workshop with heat bay | 111m2 for 24 |
| Food room | 104m2 for 24 if one space, 97m2 if two spaces |
| Music classroom | 62m2 for 30 |
| Drama studio/music recital room | 83m2 for 30 |
HSE Education
(https://www.hse.gov.uk/services/education/index.htm)